How to install ClockworkMod CWM on Android
For tech fanatics, those who always want more from Android and striving to reach its optimum potential may not find Android’s stock recovery to be sufficient enough to balance their needs. And this is where a third-party recovery environment enters the game that helps you surpass the benefits hugely limited by your preinstalled recovery software.
Apart from TWRP – an alternative, which we have also compared below – ClockwordMod (CWM) is one of the popular custom recoveries available for Android. So, as the title refers, lets straight-in get into the method that you’ll be required to Install CWM Recovery on Android.

Introduction to CWM Recovery

NOTE: You can skip this section if you are an advanced user and well-versed with the know-how of ClockwordMod recovery and the risks associated with flashing your Android device.

CWM is a customized recovery for Android that allows users to overcome certain limitations imposed by Google’s recovery environment. It gives more sophisticated control over numerous system-level operations such as recovery, restoration, installation, and maintenance.

While you can perform a lot of advanced stuff having CWM recovery flashed on your Android smartphone, booting recovery mode for installing and dealing with third-party Android ROMs will still be the primary and, moreover, a necessary prerequisite.

Since stock Android recovery is a minimal system, there could be several reasons why you want to replace it with a custom recovery environment.

Method 1: Install CWM Recovery on Android Without PC

If you aren’t a “tech-person” or just don’t want to get into intricacies that come along flashing custom ROMs, you should go with this handy method for installing CWM recovery by using either of the apps mentioned below.

The only prerequisite for this method is that your device must be rooted, and also, don’t forget to take a backup of your data for the worst-case scenario if something goes wrong.

Risk Involved: For installing CWM, you would be required to root your device. And rooting would void your phone’s existing warranty and prevent your phone from receiving bug patches from the device manufacturer. Therefore, be mindful before you get your hands onto the process.

ROM Manager

It’s a must-have app for Android root users and an easy-to-use utility with a less cluttered user interface that helps users in flashing ROMs, organizing and making backups, and more.

ROM Manager

Step 1. To begin, first, download ROM Manager from Google Play Store and install it.

Step 2. Launch the application, and initially, you will encounter a message notifying you something about the updates, so without a second thought, click on OK.

Step 3. Since this is your first time flashing an Android device with a custom recovery, select the first ClockworkMod Recovery option under “Install or Update Recovery.”

Step 4. And next, you will be asked to confirm your phone model, so do it and proceed further.

However, if you don’t find your device on the list, it must be unsupported, therefore to reassure, click on “Device Not Listed Above,” and most likely the system will tell you to manually install a ClockworkMod based recovery.

Now, give the below-mentioned app a try, and if in case that too doesn’t work for you, navigate to the manual method to get the job done anyway.



True to its name, from flashing boot and recovery .img to building your flash queue, Flashify has got every functionality an advanced may ever look for. However, you can only use the app for free up to 3 flashes per day, and for an extension on the limit, you can use quick in-app purchases.

Step 1. To get started, download Flashify from Play Store and open it.

Step 2. Accept Disclaimer and next tap on Allow to grant Flashify to get root permission.

Step 3. Now before you get into flashing the recovery, it’s advisable to take a backup of your stock recovery beforehand. For doing that, click on BACKUP/RESTORE >> Backup current recovery and give your backup a name and choose a destination where you want to save it. And hit, “Back it up!”

Step 4. Once you have the backup, switch to FLASH tab and select Recovery image, then choose Download CWM and you will be presented with a list of .img files, out of all you have to choose the latest CWM recovery image (should be the first one)

Step 5. Wait for the file to get downloaded, flash it and upon completion click on Reboot Now. That is it!

Method 2: Install CWM Recovery using PC

If none of the Android applications referred above helped you installing CWM recovery, this is the second yet last method you have. And for making the installation guide less complicated, we have broken it into 3 parts so that you can follow through with no hassle.

Install ADB and Fastboot Drivers

Step 1. To get started, the very first thing that you will be needed to do is to install ADB drivers and minimal ADB Tools on your PC. 

Step 2. After downloading the .exe file, launch the adb.exe file to begin the installation process.

Step 3. Upon completion, comply with the Installation Wizard and Create a desktop icon.

Step 4. Once you have installed the tool, launch the tool from the desktop icon named as “Minimal ADB and Fastboot”. You should now see a command window open, with the command window open you can now issue ADB and Fastboot commands to your device.

Now, to connect your device with ADB, follow the below given steps.

Enable USB Debugging

Install CWM Recovery using PC

Step 1. Open your phone Settings and navigate to System and select About phone. Now scroll down to the bottom and tap Build number 7 times. You will get a short popup notifying that you are now a developer.

Step 2. Go back and click on Advanced, select Developers options, and search for USB debugging.

Step 3. Once located, simply toggle it ON, and you will get a prompt confirming the changes you are going to make, so click on OK, and you are done with this part.

Install ClockworkMod using ADB

Step 1. Firstly, download the latest CWM recovery .img file from here.

Step 2. And then, head over to your C Drive and look for the ADB folder (C:/ADB) and open it.

Step 3. Now, rename the downloaded CWM recovery file to recovery.img and paste it on the ABD folder.

Step 4. Within the empty space inside the folder, do Shift + Right-click and select Open command window here

Step 5. Connect your device to your PC using a USB cable and then, run the following command to make sure that it detects your device

adb devices

Step 6. If you see your device listed, enter the next command

adb reboot bootloader

Step 7. Now, wait until your phone reboot in bootloader mode. Then open your phone in Fastboot mode and type the following command and hit Enter

fastboot flash recovery recovery.img

Step 8. It will flash the recovery on your phone and lastly to reboot it run the below command

fastboot reboot

Yup, that’s pretty much all. You have successfully flashed your device with CWM recovery.

CWM Recovery vs. TWRP

As promised earlier, here is an unbiased comparison of popular custom recoveries. It’s true that ClockwordMod used to be a widely used recovery, but it’s not anymore in the league, now it’s TWRP all the way up with no contender around!

Since the software company which developed CWM has stopped building its versions anymore, there are no new releases of ClockworkMod Recovery images for any mainstream Android smartphones and tablets.

You may not find any proper info on the internet regarding this, but if you simply make a Google search for the latest CWM recovery image, you will find that there’s no update on ClockworkMod custom images from the last 5 years.  Now making comments on its user interface, back/restore options comparing to TWRP does not make any sense.

With this, you know what’s the better choice for you to go for; it’s undoubtedly Team Win Recovery Project even if you consider other essential aspects too. Still, you may find peoples using CWM, but why to use when you already have the alternative worth choosing for?

So, that’s it, we hope you found this guide helpful for your needs. If you have any queries regarding this topic, put them down in the comment box below, and we’d love to answer you with possible resolutions.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *


  1. I have micromax canvas unite 4 pro which is running in 5.1 lollipop but I wanna customize it thats’y I have rooted it but I am facing too many difficulties to install xposed framework ……..and there is no recovery img for unite 4 pro…please please help me how can I install xposed framework….please help me