Moto MAXX XT1225 & Droid Turbo XT1254 were one of the best Smartphones of 2015 & still they have pretty good specifications as compared to recent flagship devices. Its hard to believe that companies stop pushing latest Android updates for such devices. If you are still waiting for Android Marshmallow for Motorola Maxx XT1225 & Droid Turbo XT1254, you can can try this latest Preview build of CM 13 for XT1225 & XT 1254. As its a preview build, you might find few bugs but as per my experience with this ROM, almost everything is working in Maxx XT1225. Before starting off with Installing CM 13 in Motorola Maxx XT1225 & Droid Turbo XT1254, make sure you comply with all the prerequisites. Lets begin with Updating Motorola Maxx XT1225 & Droid Turbo XT1254 to Android M 6.0.1!
About CyanogenMod (CM13)
CyanogenMod is an alternative operating system intended to replace the one pre-installed on your smart phones and tablets. If you’ve got an older device that isn’t getting updates anymore, or if your device seems unusually slow, or maybe you’re sick of spyware, adware, and other unwanted garbage on your phone that you can’t remove… Maybe your device is missing features or has been otherwise artificially limited in functionality. Perhaps you just could use a boost in performance. Or maybe you’d like to be more confident that your operating system has included some of the latest bug fixes. If so, CyanogenMod might be for you.
- ROM OS Version: 6.0.1 Marshmallow
- ROM Firmware Required: Stock 5.1.1 Firmware
- ROM Kernel: Linux 3.4.x
- Status: Preview
Prerequisites before Installing CM13 ROM in XT1225 & XT1254:
- Unlocked Bootloader.
- Rooted Motorola Maxx XT1225 & Droid Turbo XT1254 with custom recovery like TWRP, CWM, Philiz etc.
- Backup all your important data so that if in case anything goes wrong, you can switch back to stock ROM & restore the backup data.
- Device charged upto 50% to avoid shutdown during the flashing process.
- Required ROM file & GApps package (At the end of post)
Note: DevsJournal won’t be held responsible for anything happening to your device during this process as you have decided to make this modifications. This ROM is only for Galaxy S2 (I9100) variant. Don’t install in any other variant. If you are new to Rooting, you must refer to Complete guide about Rooting. After this process, your warranty will be void & in most cases, you won’t be able to get it back.
It’s a little bit personalized build. Examples of personalization are: different “adb root” handling, shows 4G instead of LTE, easier flappy bird etc.
How to install CM13 in Motorola Maxx/Droid Turbo
Step 1: Download the ROM file & GApps package from the links at the bottom of the post. Make sure you use a proper download manager & good internet connection to avoid data corruption while downloading files.
Step 2: Transfer the downloaded zip files in your Internal storage & boot into recovery. You can boot into recovery mode by two methods, Use TWRP Recovery only
- Download Rebooter App from Google Play Store & grant root access. Launch the app & select, Reboot to recovery.
- Switch off your device, Press and hold Vol UP + Home + Power button simultaneously. Leave the keys after 5 secs.
Step 3: Once you have booted into recovery mode, Optional: Go to “Backup & Restore” and select System, data, boot.
Step 4: Now its time to flash CM 13 in XT1225 & XT 1254. But before doing that, go to Wipe (in TWRP Recovery) & select cache, system (Select system only if you are coming from other ROMs), data dalvik cache. Swipe to confirm wiping.
Step 5: Go to TWRP Homescreen & click on Install. Select the CM 13 ROM for Moto Maxx / Droid Turbo zip from the list of files. Swipe to confirm flashing. This might take around 5mins.
Step 6: Once you have completed flashing the ROM, flash the Gapps package by again going into Install and locate the GApps zip file. Swipe to confirm & you’re done with Installation part.
Step 7: Now clear cache & boot your device. First boot might take sometime so no need to panic.
Download CM 13 (Android M) for Motorola Maxx/Droid Turbo
Root is now disabled by default on CyanogenMod 13. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB. Make sure you don’t report bugs if you have installed any custom apps or edited system files.