How to Root & Install Custom Recovery in Lenovo A6000

One of the most powerful budget smartphone, Lenovo A6000 & Lenovo A6000 Plus received Android Lollipop 5.0.2 on 4th September. While many of the users are not much happy with the update as it ultimately made the phone slower & reduced battery life. But, you can actually fix many of this issues by rooting your device. Rooting provides many features, check here: Features of Rooting & Custom ROMs.

Major Features of Rooting

  1. Boost your Phone speed & Battery Life.
  2. Remove Preinstalled crapware like System Apps.
  3. Remove Bloatwares, Apps like Facebook, Chrome Keep sucking your Ram & battery by running in background So, Among the smartphone geek crowd, applications like these are referred to as “bloatware:” they do nothing but bloat the software by existing as unnecessary applications.
  4. Tweak your phone like : Increase Video streaming speed, Increase Wifi Speed, Increase SIM detecting Speed, Increase SD read/write speed.
  5. Most Important & Best part, Install Custom Kernel & Custom ROMS ( I will explain about it in Installing Custom ROM section Custom ROM section )
  6. Finally, Truly Own your Device, Make it appear in the way you want.
Note: This method is tested with Lenovo A6000 & A6000 Plus running on Android lollipop 5.0.2 & found to be working 100%. Keep in mind, Rooting voids your device’s warranty. Please make your mind before following any of the steps mentioned below.

Prerequisites:

  1. Lenovo A6000, charged upto 40%.
  2. A USB Cable.
  3. Tools required (Contains ADB, fastboot, supersu, custom recovery): Download 
  4. TWRP Recovery 3.1.0 & replace this recovery with recovery.img in the downloaded Tool folder – Download
Note: If you just want to gain Root Access, follow the step mentioned here: How to temporary root Lenovo A6000 through phone using KingoRoot. Follow the KingoRoot method.

How to Root Lenovo A6000 / Plus

Rooting A6000 and A6000 Plus is pretty easy. The rooting procedure of A6000 and A6000 Plus can be broken down into 2 steps, Installing TWRP Recovery & finally installing SuperSU to gain root access. Each new step relies on the previous step to have been completed, and a basic summary of each part is:

Stage 1: Installing a Custom Recovery: Stock recovery doesn’t allow any installation of 3rd party zip files. In order to install any other zip which is not signed by the firmware manufacturer, we need to install TWRP Recovery. TWRP is a powerful tool that gives control over the phone without needing to boot into Android. It can be used to flash a ROM or use minor app mods, as well as to create and manage backups.

Stage 2: Rooting: SuperSu is an app that grants you Administrator rights (called “root access”) to run or install specific apps restricted by the Android Operating System for security concerns.

How to Install TWRP Recovery in Lenovo A6000 / Plus

Step 1. Connect your Lenovo A6000/A6000+ to your PC by enabling USB Debugging mode from Developer options in Settings. If you can’t find the developer options, Goto Settings> About Phone> Device Information. Tap 7 times on the Build Number. Now you can find the developers options in Settings.

Step 2. After connecting, Select USB Storage device (Open USB Storage).

Step 3. Extract the downloaded files. Copy SuperSU.zip from the zip file into your SDcard or Internal Storage.

Step 4. Now, Open command.bat from the extracted folder & type

adb devices

It should return a screen similar to this

Command: ADB Devices
Command: ADB Devices

Step 5. Now type:

adb reboot bootloader

The above command will boot your device into ‘bootloader’ mode. As soon as you enter this command, you would see A Lenovo Logo with small text “Powerkey long press can reboot phone” at the bottom of the screen.

command: adb reboot bootloader
command: adb reboot bootloader

Step 6. Now, type

fastboot flash recovery recovery.img

This would replace the stock recovery with TWRP Recovery.

Flash Recovery
Flash Recovery

Step 7. Now switch off your device & remove the USB cable. Press & Hold Volume Up + Volume Down Power button simultaneously.

You will see the TeamWin Recovery in your device

How to Root Lenovo A6000 / Plus

Step 1. Click on the Backup option on the TWRP screen, select Boot & System option in the Partitions and swipe it.

You will see the TeamWin Recovery in your device.

Step 2. Wait for completion of the Backup Process and then Click on the Wipe option on the TWRP screen, select Dalvik Cache option in the Partitions and swipe it.

Step 3. Download and transfer the Supersu zip file to your device.

Step 4. In the main menu, tap on Install option and search for the Supersu zip file.

Step 5. Select the file and swipe to the right to start the flashing process.

Step 6. Next, remove your device from PC and Reboot by long pressing the power button. Alternatively, remove and reinsert the battery, then restart.

Step 7. Don’t interrupt the boot process, give some time for the first boot.

Step 8. Done! You have successfully rooted your Lenovo A6000 & A6000 Plus.

Conclusion

You have successfully installed TWRP Recovery, Rooted your Lenovo A6000 & A6000 Plus. If you are stuck at any step, you can contact us through the comment section or the contact us page.

Similar Posts

Leave a Reply to Athar Mian Cancel reply

Your email address will not be published. Required fields are marked *

271 Comments

  1. Cannot download prerequisites -3, Tools required as access denied!
    Sent request many times!
    No email recd so far!

  2. Even after successful flashing I am unable to boot into TWRP recovery.

    target reported max download size of 268435456 bytes
    sending ‘recovery’ (13204 KB)…
    OKAY [ 0.417s]
    writing ‘recovery’…
    OKAY [ 0.361s]
    finished. total time: 0.780s

    Any idea what is the issue?

  3. hello i do all steps and it does well but when i restart the phone with pwrbuttn and up+down volume it stucks in lenovo logo and no go in twrp

  4. after writing “fastboot flash recovery recovery.img” the exact message is ” the current directory is invalid ” ……………….. what is the solution ???

  5. dear admin , i am stuck after step 6 . after writing “fastboot flash recovery recovery.img” in the cmd it shows the message “invalid directory ” . what am i doing wrong???

      1. unknown partition ‘recovery.img’
        error: cannot determine image filename for ‘recovery.img’
        It gives the above error.